Ninebot Scooter Not Turning On: Troubleshooting Tips for Quick Fix

Ninebot Scooter Not Turning on

The Ninebot scooter may not turn on due to a dead battery or a faulty power switch/button. To troubleshoot, first ensure the battery is fully charged and connected properly.

If the battery is fine, check the power switch/button for any damage or obstructions. If necessary, replace the battery or repair/replace the power switch/button. Scooters have become popular modes of transportation, and the Ninebot scooter, with its sleek design and eco-friendly features, has gained a significant following.

However, users may encounter issues, such as the scooter not turning on. We will explore the potential causes behind this problem and provide practical solutions for troubleshooting it. By following these troubleshooting tips, users can easily identify and rectify the issue, allowing them to get back on the road with their Ninebot scooter.

Power Issue

Having trouble with your Ninebot scooter not turning on? The power issue could be the culprit. Don’t worry – we have solutions to get your scooter up and running again.

If your Ninebot scooter is not turning on, it could be due to a power issue. The scooter relies on a well-functioning battery to power up and get you moving. Here are some steps to troubleshoot the problem:

Check Battery Connection:

  • Ensure that the battery is securely connected to the scooter. Sometimes, due to vibrations or impacts during rides, the battery connection might loosen up. Checking and tightening the connection could solve the issue.

Ensure Battery Is Charged:

  • Confirm that the battery has enough charge to power on the scooter. A low or depleted battery can prevent the scooter from turning on. Plug in the charger and let the battery charge for a sufficient amount of time.

Inspect Battery Wires:

  • Examine the battery wires for any visible signs of damage or loose connections. If there are any frayed wires or connections that are not properly secured, it can disrupt the power flow and cause issues with turning on the scooter. Fixing or replacing the wires might be necessary.

Check Battery Health:

  • Evaluate the overall health of the battery. Over time, batteries can wear out and lose their ability to hold a charge. If the battery is old or damaged, it may need to be replaced with a new one.

Reset The Scooter:

  • Perform a soft reset on the scooter by turning it off, disconnecting the battery, and waiting for a few minutes before reconnecting it. This simple reset can sometimes resolve power-related issues.

Contact Customer Support:

  • If none of the above steps resolve the power issue, it might be time to reach out to Ninebot customer support. They have the expertise to guide you further and provide specialized assistance.

Remember, addressing a power issue is crucial to getting your Ninebot scooter back on track. By following these troubleshooting steps, you can potentially identify and fix the problem, allowing you to enjoy your rides again.

Malfunctioning Control Unit

A malfunctioning control unit may be the reason why your Ninebot scooter is not turning on. Ensure that the control unit is functioning properly to restore power to your scooter.


If your Ninebot scooter is not turning on, one possible cause could be a malfunctioning control unit. This crucial component controls various functions, including power distribution and speed regulation. To troubleshoot and resolve this issue, follow the steps below.

Reset Controller:

To begin resolving the problem, try resetting the control unit. Here’s how to go about it:

  • Locate the control unit on your Ninebot scooter.
  • Find the reset button, usually located on the side or bottom of the unit.
  • Press and hold the reset button for about 10 seconds.
  • Release the button and wait for a few moments.
  • Try turning on your scooter again to see if the issue has been resolved.

If resetting the controller didn’t fix the problem, move on to the next step.

Check For Faulty Connections:

Often, faulty connections can disrupt the functioning of the control unit. To check for any loose or disconnected cables, follow these steps:

  • Turn off your Ninebot scooter and ensure it is unplugged.
  • Examine the control unit and all connected cables thoroughly.
  • Make sure all cables are firmly plugged in and there are no signs of damage or wear.
  • In case you find any loose connections, reconnect them securely.
  • Once you have checked and fixed all connections, try turning on your scooter again.

Continued issues may require replacing the control unit.

Replace Control Unit:

If neither resetting the controller nor checking for faulty connections resolved the problem, it may be necessary to replace the control unit. Here are the steps to follow:

  • Contact the manufacturer or authorized dealer to procure a new control unit.
  • Once you have the replacement part, turn off your scooter and unplug it.
  • Carefully remove the old control unit, disconnecting all attached cables.
  • Install the new control unit, ensuring all connections are secure.
  • Double-check all connections before turning on your scooter again.

Now that you have completed these steps, your Ninebot scooter should hopefully turn on without any issues. If the problem persists, it may be best to seek assistance from a certified technician or the manufacturer for further troubleshooting and repair.

Motor Problem

Having trouble turning on your Ninebot scooter? It could be a motor problem. Get your scooter up and running again with these troubleshooting tips.

If your Ninebot scooter is not turning on, there might be an issue with the motor. The motor is crucial for the scooter’s functionality, as it propels the scooter forward and enables it to turn. Here are some troubleshooting steps to help you identify and resolve a motor problem:

Inspect Motor Connections:

  • Check if the motor connections are secure and properly plugged in.
  • Ensure that there are no loose or damaged wires.
  • Examine the connectors for any signs of corrosion or damage.
  • Make sure the motor connection is firmly attached to the scooter’s control board.

Check For Motor Damage:

  • Inspect the motor for any visible signs of damage, such as dents, cracks, or exposed wires.
  • Look for any unusual sounds coming from the motor while attempting to turn on the scooter.
  • Check if the motor spins freely or if it seems jammed or stuck in place.

Replace Faulty Motor:

  • If you have detected a faulty motor through the previous steps, it might need to be replaced.
  • Contact the manufacturer or a certified repair technician for further assistance.
  • Ensure that the replacement motor is compatible with your Ninebot scooter model.
  • Follow the manufacturer’s instructions or seek professional help to swap the motor.

Remember to always prioritize safety when working on your scooter. If you are unsure about performing any troubleshooting or repair tasks yourself, consult a professional.

Other Possible Causes

Possible causes for a Ninebot scooter not turning on may include a dead battery, faulty power switch, loose connections, or a damaged charger. Check these factors to troubleshoot the issue.

If your Ninebot scooter is not turning on, there could be a number of other causes that you need to consider. Here are some potential reasons why your scooter might not be turning on:

  • Faulty Power Switch: The power switch on your scooter might be faulty, preventing it from turning on. Check if the switch is in the correct position and functioning properly. If necessary, try toggling the switch a few times to see if that solves the issue.
  • Damaged Wiring: The wiring of your scooter may have become damaged or loose, interrupting the power flow and preventing the scooter from turning on. Examine the wiring carefully for any signs of wear or damage. If you find any issues, it’s best to consult a professional technician to repair or replace the damaged wiring.
  • Sensor Malfunction: Your scooter relies on various sensors to function properly. If one of these sensors malfunctions, it can prevent the scooter from turning on. Pay attention to any error codes or indicators on the scooter’s display that may point to a sensor problem. In such cases, contacting customer support or a repair technician is recommended.

Keep in mind that these are just a few possible causes for your Ninebot scooter not turning on. If none of these suggestions resolve the issue, it’s advisable to reach out to the manufacturer’s customer support or consult a professional technician for further assistance.

Ninebot Scooter Not Turning On: Troubleshooting Tips for Quick Fix


Frequently Asked Questions On Ninebot Scooter Not Turning On

How Come My Kickscooter Is Not Powering On?

Your Kickscooter may not be powering on due to a dead battery or a faulty power connection.

How Do I Reset My Ninebot Electric Scooter?

To reset your Ninebot electric scooter, follow these steps: 1. Turn off the scooter and make sure it’s not connected to any devices. 2. Press and hold the power button for 10 seconds until you hear a beep. 3. Release the power button and wait for the scooter to turn off and on again.

4. Your scooter is now reset and ready to use.

Why Isn T My Ninebot Scooter Going?

If your Ninebot scooter isn’t moving, check the battery, ensure it’s charged and securely connected.

How Do I Get My Ninebot Scooter To Work?

To get your Ninebot scooter working, follow these steps: 1. Charge the battery fully. 2. Press the power button to turn it on. 3. Use the accelerator to move forward. 4. Brake using the brake lever to stop.


Troubleshooting a Ninebot scooter that won’t turn on can be a frustrating experience. However, by following the steps outlined in this blog post, you can identify and fix the issue. Start by checking the power switch and ensuring it is turned on.

If the scooter still won’t turn on, examine the battery connections to make sure they are secure and clean. Additionally, check the battery level and charge it if necessary. If the issue persists, try resetting the scooter by turning it off and on again.

If all else fails, it may be necessary to seek professional assistance. By taking the time to troubleshoot and address the problem, you can get your Ninebot scooter back up and running, allowing you to enjoy your rides to the fullest.

Remember to always prioritize safety and proper usage when operating any motorized scooter.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *