Xiaomi Scooter Pro 2 Not Turning on: Troubleshooting Guide

Xiaomi Scooter Pro 2 Not Turning on

The Xiaomi Scooter Pro 2 not turning on may be due to a battery issue or a software malfunction. Having a Xiaomi Scooter Pro 2 that doesn’t turn on can be frustrating.

Whether you rely on it for daily commutes or leisurely rides, it’s important to address this issue promptly. Several factors could contribute to the problem, such as a depleted battery or a software glitch. We will discuss potential solutions to help troubleshoot and resolve the Xiaomi Scooter Pro 2 not turning on issue.

By following these steps, you can potentially get your scooter up and running again without any hassle. Let’s dive into the possible causes and find a suitable solution for your situation.

Xiaomi Scooter Pro 2 Not Turning on: Troubleshooting Guide

Credit: www.mearth.com.au

Common Causes Of Xiaomi Scooter Pro 2 Not Turning On

If your Xiaomi Scooter Pro 2 is not turning on, there are several common causes to consider. It could be due to a drained battery, a faulty power switch, a loose connection, or a software issue. Check these potential issues to troubleshoot and get your scooter up and running again.

Is your Xiaomi Scooter Pro 2 giving you trouble and not turning on? Don’t worry, we’ve got you covered. There could be a few common causes behind this frustrating issue. Let’s explore them:

Battery Issues

  • Low Battery: One of the most common reasons for your Xiaomi Scooter Pro 2 not turning on is a low battery. Make sure you check the battery level before panicking.
  • Loose Connections: Inspect the battery connections to ensure they are securely attached. Any loose connections could prevent the scooter from powering on.
  • Faulty Battery: Unfortunately, batteries can degrade over time. If your Xiaomi Scooter Pro 2 battery is not holding a charge or seems defective, it may need to be replaced.

Power Button Problem

  • Stuck Button: Check if the power button is stuck or not functioning properly. Dust or debris can sometimes interfere with its operation. Give it a gentle clean and see if that resolves the issue.
  • Mechanical Failure: The power button itself may be faulty due to a mechanical problem. In this case, you may need to have it repaired or replaced by a professional.

Motor Or Controller Malfunction

  • Motor Issue: If the motor of your Xiaomi Scooter Pro 2 is malfunctioning, it may prevent the scooter from turning on. Look for any unusual noises or signs of damage to the motor.
  • Controller Problem: The scooter’s controller is responsible for regulating the power supply to the motor. If the controller is faulty, it can hinder the scooter’s ability to start.

Remember, these are just some of the possible causes for your Xiaomi Scooter Pro 2 not turning on. If you’re unable to identify or resolve the issue on your own, it’s always best to consult with a qualified technician who can provide further assistance.

Troubleshooting Steps For Xiaomi Scooter Pro 2 Not Turning On

Having trouble turning on your Xiaomi Scooter Pro 2? Follow these troubleshooting steps to fix the issue and get back on the road in no time.

If you’re facing issues with your Xiaomi Scooter Pro 2 not turning on, don’t worry! We’ve got you covered. Follow these troubleshooting steps to get your scooter up and running again:

Check Battery Connection

  • Ensure that the battery connection is properly secured and not loose.
  • Make sure the charging port is clean and free from any debris.
  • Check if the battery has enough power to turn on the scooter.

Charge The Battery Fully

  • Connect the charger to the scooter and let it charge fully.
  • Ensure that the charger is properly plugged into a power source.
  • Wait until the battery is fully charged before attempting to turn on the scooter.

Reset The Scooter

  • Locate the reset button on the scooter.
  • Press and hold the reset button for a few seconds.
  • Release the button and try turning on the scooter again.

Inspect And Clean The Power Button

  • Check if there are any visible signs of damage or dirt on the power button.
  • Use a soft cloth or cotton swab to clean the power button.
  • Ensure that the power button is functioning properly.

Test The Motor And Controller

  • Inspect the motor and controller for any visible signs of damage.
  • Check if all the cables are securely connected.
  • Test the motor and controller by connecting a different battery if possible.

Seek Professional Assistance If Necessary

If none of the troubleshooting steps mentioned above work, it may be time to seek professional assistance. Contact the authorized service center for further assistance and professional repair solutions.

Remember, by following these troubleshooting steps, you can easily identify and resolve common issues with your Xiaomi Scooter Pro 2 not turning on. Stay safe while riding and enjoy your scooter to the fullest!

Frequently Asked Questions On Xiaomi Scooter Pro 2 Not Turning On

What To Do If My Electric Scooter Won’T Turn On?

If your electric scooter won’t turn on, try checking the battery connections and charging it fully.

How To Reset Xiaomi Pro 2 Scooter?

To reset Xiaomi Pro 2 scooter, follow these steps: Turn off the scooter. Hold the power button + brake lever for 5 seconds. The scooter will reset.

How To Turn On Xiaomi Pro 2?

To turn on Xiaomi Pro 2, press and hold the power button until the device starts.

How To Hard Reset Xiaomi Mi Pro 2?

To hard reset your Xiaomi Mi Pro 2, follow these steps: 1. Go to the “Settings” menu on your phone. 2. Tap on “About phone” and then select “Reset options. ” 3. Choose “Erase all data” and confirm your selection. 4.

Your Xiaomi Mi Pro 2 will now be reset to its factory settings.


Troubleshooting the Xiaomi Scooter Pro 2 when it’s not turning on requires a systematic approach. Start by checking the battery and ensuring it’s fully charged. If the battery is not the issue, inspect the power switch and make sure it’s functioning correctly.

If the scooter still won’t turn on, consider checking the wiring connections and see if there are any loose or damaged wires. If necessary, contact Xiaomi’s support team for further assistance. Remember, regular maintenance and proper usage can help prolong the lifespan of your electric scooter.

Keeping your scooter clean, avoiding extreme temperatures, and following the manufacturer’s guidelines will ensure optimal performance. Stay proactive and enjoy the convenience and efficiency of your Xiaomi Scooter Pro 2 for years to come.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *